|
WHAT IS IT?
A plastic-molded ACTIVE, Full-Range speaker with real punch!
It has TWO built-in amplifiers; 125 watts RMS in total that gives a really punchy, clear sound. Very high 'SPL' figure for this size and price - at 123 dB this is loud.
On the back is effectively a small mixer with a couple of inputs and the controls.
There are inputs for a Microphone and Line input (from a mixer for example), a Line-Out so you can link it to another ACTIVE speaker and overall volume, treble and bass controls.
WHAT YOU CAN USE THIS FOR ....
Active Monitor: Either pole mounted or on the floor (clip-on feet are available), used as a monitor this speaker is a very efficient for a small unit. Doesn't take up much room on stage, but gives you a clear foldback that really cuts through.
PA Speaker: 125 watts and a 10" driver is a bit small for PA work, but if it's only low volume stuff or speech it's good enough. With an active sub it works really well. We have a special package with two of these speakers and one or two 15" 450watt ACTIVE bass speakers - a great sound!
Instrument Amp: For Keyboard or even DJ monitoring this works fine.
RealSlimDavey says ...
I'm really impressed with the punchy sound from this little speaker. It is a little on the 'trebley' side, but that actually helps it as a monitor and contributes to the punch. Brilliant as PA with an Active Bass Speaker.
CONSTRUCTION
-
-
Trapezoidal design; really tough, robust, polypropylene molded cabinet.
-
Handle built-in to one side - other side shaped for ease of use as a floor monitor.
-
Slots in side for attaching clip-on feet - used to better position as a floor monitor.
-
Top-Hat fitting in the base to take speaker poles or stands.
-
Metal Grill covering the driver.
-
Neodymium Bass Driver (10") and HF Driver (1").
-
Flying points to mount the speaker via suitable cables to trussing or ceiling points.
REAR PANEL:
Heat-sink fins to help cool the Amplifiers
INPUTS:
Mic - Jack & Balanced XLR
Line - Stereo Phono & Balanced XLR
Note - for each channel you can only use one input at a time.
LINE OUTPUTS:
Jack & Balanced XLR
CONTROLS:
Separate VOLUME control for each input.
Master VOLUME control
Overall TREBLE & BASS controls
Mains-In Plug, On/Off Switch, Fuse, Power lIght, CLIP light, Earth-Lift Switch.
TECHNICAL SPECS etc ...
-
-
LF (low frequency) Power Amp - 100 watts RMS
-
HF (high frequency) Power Amp - 25 watts RMS
-
Max SPL - 123 dB
-
Frequency Response: 70Hz to 16 kHz
-
Dimensions: 360mm x 500mm x 270mm
-
Weight: 14 Kgs
|
ABOUT
RSD 
