|
WHAT IS IT?
This range of speakers from LD-Systems deliver high power, crystal clear, warm sounds in a versatile cabinet. There are two sizes - 12" and 15" - and both come in PASSIVE or ACTIVE (built-in amp) forms.
The cabinet shape enables you to use these speakers as monitors on the floor, or you can stack them (on bass bins?) or mount them on speaker poles - they have the 'multi-angle' LD-Systems top hat fitting.
All versions have 18mm ply wooden cabinets with a hard-wearing paint finish and have foam covered metal grills to protect the speakers. The drivers are all EMINENCE components.
WHAT YOU CAN USE THIS FOR ....
-
Full-range speakers for Bands or Discos - best on speaker stands
-
Powerful Mid/Tops to work with bass speakers.
-
Powerful floor monitors for big stages.
-
Flown from above in big venues to spread the sound around
REALSLIMDAVEY SAYS ...
Strong wooden cabinets, Eminence Drivers, careful design, versatile function - these are really very good speakers. You could spend a lot more on some big name brand speakers and not get any better performance.
CONSTRUCTION
-
All the cabinets are made from 18mm ply and finished with a hard-wearing black paint.
-
All cabinets have square 'any angle' style handles cut into them.
-
Slots cut in to enable installation of (Adam Hall) flyware, so you can fly the speakers from the ceiling or from trussing.
-
The ACTIVE versions have inputs and controls on the back. The amplifier modules are from B&O (Bang & Olufsen).
INPUTS:
The PASSIVE versions have 2 Speakon connectors
The ACTIVE versions have mains in, Mic Input and Line Input
OUTPUTS:
The ACTIVE versions have a LINE out and a SPEAKON out so you can connect an extra PASSIVE speaker.
CONTROLS:
ACTIVE versions: Volume for mic in, Volume for Line in, Master Volume, Treble & Bass, On/Off Switch
TECHNICAL SPECS etc ...
-
ACTIVE (built-in Amplifier)
-
Power Rating: 500W RMS
-
Overall Sensitivity (SPL): 103dB @ 1m/1w
-
Overall Max SPL: 130dB
-
Frequency Response: 45Hz to 18kHz
-
Bass Driver: 15"
-
Horn: Low Impedance Compression 1" Driver.
-
External (approximate) Measurements: 50cms x 65cms x 44cms
-
Weight: 31Kg
|
ABOUT
RSD 
